Velleman VSCP1 USER MANUAL Manual de usuario descargar pdf (Pagina 2)

VSCP1-VISP1 VELLEMAN

2. To adjust pan limit stops (see Figure 2), loosen screws securing both

stops (1) and (3) to unit. Slide stops around unit to desired locations and

secure by tightening screws.

3. To adjust tilt limit stops (see Figure 2) located in each end plate, remove

two screws securing each end cap to unit. Loosen and adjust tilt limit

stop screws for desired tilt limit position. Tighten limit stop screws and

reinstall each end caps to unit and secure with two screws.

Figure 2

Limit Stop Adjustment and Camera Mounting Plate

1 2 3 4 5

Sin comentarios

Velleman VSCP1 USER MANUAL Manual de usuario Pagina 2