Velleman VMB1LED Manual de usuario descargar pdf (Pagina 17)

VMB1LED PWM LED strip dimmer Manual– edition 1_rev.2

Addressing

Every module in the Velbus system must have a unique address.

On modules with a rotary switch like this dimmer the address is set using the ‘ADDR’ rotary switch (also refer to

the manual of the relevant module). For modules without rotary switches e.g. control panel VMB4PD or

temperature controller VMB1TC the address is set via a menu (see manual of the VMB4PD or VMB1TC).

These addresses may not be altered afterwards.

Remove the cover.

Select a unique address from ‘01’ to ‘FE’ for the dimmer module using the ‘ADDR’ rotary switches, except

addresses ‘81’, ‘91’, ‘A1’, 'B1', ‘C1’, ‘D1’, ‘E1’, ‘F1’ and ‘FF’.

In the example below, the address is set to ‘12’.

ADDR = 12

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 37 38

Sin comentarios

Velleman VMB1LED Manual de usuario Pagina 17