Velleman VMB4PD Manual de usuario descargar pdf (Pagina 14)

VMB4PD

Activating the Main Clock

All modules (with clock function) connected onto the Velbus

system must adopt the same time in order

to work properly.

This can be achieved by setting the main clock o none of the connected modules. This module will send

the time over the Velbus

system once every day and synchronize all other clocks.

1. Hold the configuration button pressed for 4 seconds to display the configuration menu.

2. Press the upper left button to display the clock menu.

3. Press the configuration button again to display the next clock menu.

4. Press the upper right button to (de)activate the main clock.

The lower line shows the software version.

5. Press the configuration button to quit the clock menu.

Remarks:

• Activate the main clock o none module only.

• The module will automatically quit the configuration mode after 30 seconds of inactivity.

Configuration button

Clock menu

Next clock menu

Main clock on/off

Quit clock menu

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 34 35

Sin comentarios

Velleman VMB4PD Manual de usuario Pagina 14