Velleman PSIC75B Manual de usuario descargar pdf (Pagina 5)

PSIC75/150 SERIES HQ POWER

Step 3: Connect the device.

You can extend the connection cable to the device without problems.

Step 4: switch on the inverter.

The green LED lights up. The inverter delivers an output power of 240VAC.

Step 5: Switch on the connected device.

Respect the order of the aforementioned steps. To switch off the system, proceed in reverse order.

6. Measuring AC Voltages

The output wave of the AC inverter is a MODIFIED SINEWAVE. An AUTHENTIC RMS VOLT METER is required to

measure the AC output voltage. Using any other type of voltage measuring device will result in an AC voltage

reading that is up to 20 to 30V lower than the rated value. Only an authentic RMS voltmeter provides an accurate

reading.

7. Technical Specifications

The following chart contains all VELLEMAN square wave inverters. Every type is available in a 12V or a 24V version.

The suffix x or xx stands for the plug type of the output.

S = German type Schuko plug

B = French type Schuko plug

PSIC75 PSIC150

DC Input Voltage DC 10V – 15V (12V)

Output Voltage 75W 150W

USB output - 5V / 0.5A max.

Battery-Low alarm 10.5VDC +/- 0.5VDC (12V)

Battery-Low Shutdown 10VDC +/- 0.5VDC (12V)

Auto restart The power inverter being shut off through e.g. the short-circuit protection does not

need to be switched on manually; it will restart automatically.

Short-circuit Protection Yes, with auto restart

No-Load Current 0.15A 0.2A

Overheating Protection 55°C +/- 5°C

Protection Overload, high temperature, short-circuit, reverse polarity protection

Dimensions (mm) 70 x 70 x 90 70 x 70 x 170

Weight 260g 500g

AC Output Voltage 230VAC +/- 5%

Frequency 50Hz +/- 1Hz

For more info concerning this product, please visit our website www.velleman.eu.

The information in this manual is subject to change without prior notice.

1 2 3 4 5 6 7 8 9 10 ... 17 18

Sin comentarios

Velleman PSIC75B Manual de usuario Pagina 5