Velleman IVSPROM2 Quick Installation Guide Manual de usuario Pagina 6
- Pagina / 90
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
IVSPROM2
V. 02 – 02/05/2012 6 ©Velleman nv
System
• GUI (Graphical User Interface) display and USB mouse control
• Gmail integration supports notification through Google mail server and any other mail support
• local and remote control completely independent
• VGA interface built-in with output resolution up to 1600 x 1200
• set contains:
o 1 x 4-channel H.264 Full frame DVR
o 1 x human detection PIR camera
o 1 x IR remote control
o 1 x 20m camera cables
o 1 x 19V PSU
o 1 x high-efficiency DC-DC converter for DVR and 4 cameras
• hard disks in option: (not included) 500GB (HD500GB/S) or 1TB (HD1TB/S)
• IR remote control: DVRRC4 (incl.)
• optional monitor (not incl.): MONSCA4, MONSCA5, MONSCA6, MONSCA7
• optional router (not incl.): PCRT1, EM4542, EM4553, EM4570.
5. Connection and setup
Before the DVR is powered on, make sure you have installed a hard disk, connected at least one camera and a
monitor.
Note: The DVR is designed to automatically detect the video system of the connected cameras (NTSC or PAL).
To make sure the system detection is correct; please check if the cameras are connected to the DVR and
power-supplied before the DVR is powered on.
5.1 Prerequisites
• To ensure the signal transmission, the recommended distance between this DVR and cameras should not
exceed 200 meters by using 3C2V coaxial cables (112 braids).
Using different types of coaxial cables or longer connection distances may influence the availability and
continuity of signal transmission.
• Do not use a signal booster or modem to amplify signals and extend the connection distance.
5.2 Hardware setup
Refer to the illustrations on page 3 of this quick installation guide.
Connecting a video monitor
Obtain a suitable monitor (not included) and connect it to the BNC or VGA video output port on the back of
the DVR.
Note: the CAL video output simply shows the camera output(s) directly from the video input ports. Data and/or
actions performed via the main monitor are not shown.
Connecting the power supply
1. Plug the DC output connector of the included power adaptor into the 19VDC power input at the back of
the DVR.
WARNING: only use the included adaptor.
2. Plug the included power cable into the adaptor input connector and plug the other end into the mains.
Do not switch the DVR on yet.
Connecting a camera
1. Choose a location for the camera, keeping following guidelines in mind:
o Do not install the camera in locations where extremely high or low temperatures or excessive vibrations
may occur.
o Avoid mounting the camera near high electro-magnetic fields.
o Do not aim the camera at the sun or other extremely bright objects.
2. Use the included cables to connect the video output of the camera to either video input at the back of
the DVR. The number next to the input connectors represents the channel number. Connector type is BNC.
3. Connect each camera to the power supply adaptor.
Note: The cameras must be connected and powered on before the DVR is powered on.
- B (SATA) 3
- 4. Features 5
- 5. Connection and setup 6
- 5.3 DVR power on 7
- 5.4 Date and time setting 7
- 5.5 Clear hard disk 7
- 5.6 Password setting 8
- 6.1 Connect a USB mouse 8
- 6.2 Quick menu bar 9
- 6.3 Main menu 9
- 7. Front and rear panels 10
- 7.2 Rear Panel 11
- 8. Basic operation 12
- 8.3 Playback 13
- 8.4 User switch 13
- 9. Set push notification 14
- 10.1 Flow counting 17
- 10.3 IVS Statistics 19
- 4. Eigenschappen 22
- 5.1 Richtlijnen vooraf 23
- 5.3 Inschakeling van de DVR 24
- 6. GUI-display met USB-muis 25
- 6.3 Hoofdmenu 26
- 7. Front- en achterpaneel 27
- 8. Basisfuncties 28
- 8.2 Opname 29
- 8.3 Opname afspelen 29
- 8.4 Gebruiker selecteren 30
- 9.1 Richtlijnen vooraf 31
- 10.1 Mensentelling 34
- 10.3 Statistieken 35
- 4. Caractéristiques 39
- 6.2 Le menu rapide 42
- 6.3 Menu principal 43
- 7.1 Panneau frontal 44
- 8. Fonction de base 45
- 8.2 Enregistrement 46
- 10.1 Comptage de personnes 51
- 10.3 Statistiques IVS 52
- 4. Características 56
- 5. Conexión y configuración 57
- 5.5 Borrar el disco duro 58
- 6.1 Conectar el ratón USB 59
- 6.2 El menú rápido 60
- 6.3 Menú principal 60
- 7.1 Panel frontal 61
- 7.2 Panel trasero 62
- 8. Funcionamiento básico 63
- 8.4 Seleccionar el usuario 64
- 10.1 Contador de personas 68
- 11. Especificaciones 70
- 4. Eigenschaften 73
- 5.1 Hinweise vorab 74
- 5.3 Den DVR einschalten 75
- 5.5 Die Festplatte löschen 75
- 6. GUI-Display mit USB-Maus 76
- 6.2 Schnellmenü 77
- 6.3 Hauptmenü 77
- 7. Front- und Rückplatte 78
- 7.2 Rückplatte 79
- 8. Basisfunktionen 80
- 8.3 Aufnahme wiedergeben 81
- 8.4 Benutzer auswählen 81
- 9.1 Hinweise vorab 82
- 10.1 Personenzählung 85
- 11. Technische Daten 87
Relacionado con productos y manuales para Accesorios para vídeo Velleman IVSPROM2 Quick Installation Guide
Accesorios para vídeo Velleman DVR8H3 Manual de usuario
(128 paginas)
(128 paginas)
Frigidaire FGMO206NTD manuály
Uživatelské manuály a uživatelské příručky pro ne Frigidaire FGMO206NTD.
Poskytujeme 1 manuály pdf Frigidaire FGMO206NTD ke stažení zdarma podle typů dokumentů: Elektrické schéma zapojení
Comentarios a estos manuales