Velleman CAMIP16 Quick Installation Guide Manual de usuario descargar pdf (Pagina 21)

3.3.3 Color

Adjust the color performance from Brightness, Contract, Saturation, and Hue (for selected models only). Click

and drag the slider to preview the color change on the right side of ths page and adjust the image color.

To restore the default values, click “Back to Default”.

3.3.4 Advanced

Adjust the camera parameters if necessary.

Item Description

Shutter Speed Set the shutter speed based on your need.

The options are: Up to 1/10 sec, Up to 1/30, Up to 1/15, Up to1/6, Up to 1 and Up to 2.

Exposure Control* This function is used to synchronize the shutter time to the fluorescent light to suppress image flickering.

Back light* It is the function to adjust the image to compensate for an area that is overpowered by brightness because of excessive light.

The image will be properly exposed for clearness. Select to activate (ON) or disable (OFF) this function.

Note: This function is available only in the day mode.

Mirror Select “ON” to rotate the images horizontally based on your installation situation when necessary.

Flip Select “ON” to rotate the image 180° when necessary.

De-noise* Click and drag the slider to adjust the level from 0 ~ 10 to decrease the noise shown in the dark environment.

IR Control Select “Auto” to automatically enable IR LEDs at night or in the dark environment, “On” to always enable IR LEDs, or “OFF”

to disable this function.

Enhance IR Select “On” to enhance IR LEDs performance.

IR Turn On Level Select the level for IR light to activate.

White Balance Process the current image to retain color balance over a color temperature range.

The options are: Auto, Incandescent Light, Cool Light, sun Light, Cloudy & Sun Shade.

Sharpness Sharpness enhances the clarity of image detail by adjusting the aperture and sharpening the edges in the pictures.

Hold and drag the slider to adjust the level of sharpness from 0 ~ 100. The higher the value, the sharper the image.

Wide Dynamic

Range*

Wide Dynamic Range (WDR) is used when users need to increase image recognizability in overexposure and dark areas.

The options are: LOW / MIDDLE / HIGH / OFF

*Selected models only

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 39 40

Sin comentarios

Velleman CAMIP16 Quick Installation Guide Manual de usuario Pagina 21