Velleman EDB4 Manual de usuario descargar pdf (Pagina 4)

EDB4

07/06/2010 4 Velleman

4. Features

• encoded signal prevents false alarm

• easy installation without cables

• 3 different chimes: ding, ding-dong, Westminster

• 2 doorbell push buttons: a different doorbell melody can be set

for each push button

• 16 codes

• comes with:

o 1x doorbell

o 2x doorbell push button

o 2x 12Vdc battery, type A23 (for push buttons)

5. Overview

Refer to the illustrations on page 2 of this manual.

doorbell 3 status LED

1 4.5VDC input jack 4 DIP switch + cover

2 speaker 5 battery compartment

doorbell push button (2x) C select melody jumpers

A push button D DIP switch

B activate chime button (= A) E battery compartment

6. Operation

• Insert batteries (not incl.) into the doorbell (see §8) or connect a

4.5VDC adaptor (not incl.) to the 4.5VDC input jack [1].

Polarity for the adaptor:

• Open the DIP switch cover [4] of the doorbell. Releasing the

screw and remove the cover.

• Open the doorbell push buttons by pushing gently with a small

screwdriver in the gap at the bottom of the casing (see arrow)

and removing the back cover.

• Insert the batteries into the doorbell push buttons (see §8).

• Verify that the settings of the DIP switches of the doorbell [4]

and doorbell push buttons [D] are the same. These DIP-switches

set the encoding of the transmitted signal. When interference

with similar devices in the neighbourhood is noticed, change the

1 2 3 4 5 6 7 8 9 ... 33 34

Sin comentarios

Velleman EDB4 Manual de usuario Pagina 4