Velleman DVM13MFC2 Manual de usuario Pagina 5

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 23
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 4
DVM13MFC2 VELLEMAN
-
5
-
a. Example 1: Measuring an analogue handset
Connect the test cable with the input from channel B and set the FUNCTION key to the 1-step position. Select the
gate time (adjust manually from 100 msec to 10 sec). The LED display will read:
b. Example 2: Measuring a 30Mhz intercom emission frequency
Set the FUNCTION to the 2-step position and select the gate time (adjust manually from 100 msec to 10 sec). The
LED display will read:
c. Example 3: Measuring a self-oscillating frequency (e.g. from a telephone, intercom etc.)
Set the FUNCTION key to the 2-step position. Connect one end of a cable with 5pF capacitance to the red clamp;
use the other end to measure the frequency by touching the contact point.
6. Warnings
When measuring a high-voltage or strong RF signal, make sure that the cables are in series and have a large
capacitance to avoid damage.
Press the RESET button once to reset the device or turn off the device in case the device is not working
appropriately.
When there is no input signal, the display may not necessarily read “0”. This is absolutely normal and does not
affect the measurements or the accuracy.
Do not expose the device to extreme temperatures, humidity, dirt, dust etc. Do not open the device to avoid lethal
electroshocks.
A strong interference will reduce the sensitivity when measuring.
7. Technical Specifications
Channel A (0.01Hz ~ 50MHz)
Frequency Range DC couple 0.01Hz to 100Hz
AC couple 100Hz to 50MHz
Sensitivity AC: 100Hz ~ 50MHz < 80m Vrms
DC: 0.01Hz ~ 1Hz 500m Vp-p
1Hz ~ 100Hz 80m Vrms
Impedance 1 Mohms
Attenuator X1, X20
Max. Safety Voltage 30V (DC/AC peak)
Channel B (50MHz ~ 2.4GHz)
Frequency Range from 50MHz to 2.4GHz
Sensitivity 50MHz ~ 1.2GHz 50m Vrms
1.2GHz ~ 2.4GHz > 80m Vrms
Coupling AC only
Impedance 50 ohms
Max. Safety Voltage 3V
1
-
step
900MHz
2
-
step
30MH
z
Vista de pagina 4
1 2 3 4 5 6 7 8 9 10 ... 22 23

Comentarios a estos manuales

Sin comentarios