Velleman К8077 Manual de usuario descargar pdf (Pagina 21)

120VAC : ORANGE

235VAC : BROWN

120VAC : BROWN

235VAC : ORANGE

BLACK

• Trim the black transformer wire to a length of 14cm. Slide a piece of heatshrink

tube (3cm) over the black transformer wire.

• Solder the wire to the AC connector

• Use the remaining black wire to connect the second AC connector lug with the

center connector of the fuse holder.

 Don't forget to slide a piece of heatshrink tube (4cm) over the wire.

• Connect the remaining fuseholder-connector with the power switch.

 Don't forget the heatshrink tube.

• Depending on your local AC voltage, connect either the brown wire (100-120VAC)

or the orange wire (220-245VAC) to the power switch.

 Don't forget the heatshrink tube.

• Trim the remaining wire to a lenght of 11cm. Insulate the end by means of a piece

of heatshrink tube.

• Group the wires by means of two cable ties.

HEATSHRINK TUBE

Mounting power supply section

Unused lead

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Sin comentarios

Velleman К8077 Manual de usuario Pagina 21