Velleman VDP575MHS20FL Manual de usuario descargar pdf (Pagina 7)

VDP575MHS20FL_v3 HQPOWER

Channel 17 Prism Rotation

0 127 No rotation

128 191 Forward rotation from slow to fast

192 255 Backwards rotation from slow to fast

Channel 18

Prism / Gobo

Rotating Macros

0 15 No macro

16 255 Prism / gobo macro effect

Channel 19 Pan Fine 0 255 Pan fine 16-bit

Channel 20 Tilt Fine 0 255 Tilt fine 16-bit

b. Channel Function in 8-Bit Protocol

Channel 1 Pan Channel 8 Static Gobo

Channel 2 Tilt Channel 9 Rotating Gobo

Channel 3 Pan / Tilt Speed Channel 10 Gobo Rotation

Channel 4 Reset - Lamp on / off Channel 11 Iris

Channel 5 Colour Wheel 1 Channel 12 Focus

Channel 6 Colour Wheel 2 Channel 13 Dimmer

Channel 7 Prism Wheel Channel 14 Shutter

c. DMX512 Connection

Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-

pin XLR input of the VDP575MHS20FL. Multiple VDP575MHS20FLs can be linked through serial linking. The linking

cable should be a two-core screened cable with XLR input and output connectors.

d. DMX512 Chain with Termination

A DMX terminator is recommended for installations where the DMX cable has to run a

long distance or is in an electrically noisy environment (e.g. discos). The terminator

prevents corruption of the digital control signal by electrical noise. The DMX terminator is

simply an XLR plug with a 120Ω resistor between pins 2 and 3, which is then plugged into

the XLR output socket of the last device in the chain.

Please see illustrations.

e. Occupation of the XLR Connector

How to turn the controller line from 3-pins to 5-pins (plug and socket):

1 2 3 4 5 6 7 8 9 10 11 12 ... 45 46

Sin comentarios

Velleman VDP575MHS20FL Manual de usuario Pagina 7