Velleman VDPL501MHS10 Manual de usuario descargar pdf (Pagina 7)

VDPL501MHS10

V. 01 – 30/01/2012 7 ©Velleman nv

function display description

play <PLAY> <Auto> auto program

<Soun> sound controlled mode

<dnCo> DMX controlled mode

<SLAE> slave mode

manual

control

<CH12>

<d000>

<d255>

Select the setting for each channel.

display <dISP> <No> normal display

<Yes> 180° rotated display

colour change

<CoLo> <No> colour change in steps

<Yes> colour change gradual

pan range <oPAn> 540 maximum pan range 540°

450 maximum pan range 450°

reset <rEST> <FACt> Press <Enter> for 5 seconds to reset all settings except the

DMX starting address.

<Moto> Press <Enter> for 5 seconds to reset all settings including the

DMX starting address.

c. DMX Mode

This mode allows you to control the fixture by any universal DMX controller.

• All DMX-controlled devices need a digital start address so that the correct device responds to the signals.

This digital start address is the channel number from which the device starts to “listen” to the DMX

controller. The same starting address can be used for a whole group of devices or an individual address can

be set for every device.

• When all devices have the same address, all the units will “listen” to the control signal on one particular

channel. In other words: changing the settings of one channel will affect all devices simultaneously. If you

set individual addresses, each device will “listen” to a separate channel number. Changing the settings of

one channel will only affect the device in question.

• In case of the 12-channel VDPL501MHS10, you will have to set the start address of the first unit to 1

(CH1~12), the second unit to 13 (1 + 12) (CH13~24), the third to 25 (13 + 12) (CH25~36), and so on.

• Press <MODE> until <Addr> is displayed.

• Use <UP> or <DOWN> to set the DMX starting address (A001~A512). Press <Enter> to confirm.

d. DMX Channel Values

channel function from to description

1 pan 0 255 rotate head horizontally (127 = neutral)

2 tilt 0 255 move head vertically (127 = neutral)

3 pan fine 0 255 rotate head horizontally – small increments

4 tilt fine 0 255 move head vertically – small increments

5 focus 0 255 focus

6 shutter/strobe 0 0 shutter open

1 239 strobe slow -> fast

240 246 shutter closed, device resets after 5 seconds

247 247 shutter open, device resets after 5 seconds

248 255 shutter open

7 dimmer 0 255 master dimmer, 0-100%

8 colour fixed colour

1 17 white

18 35 rose

36 53 blue

54 71 yellow

72 89 green

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Comentarios a estos manuales

Sin comentarios

Velleman VDPL501MHS10 Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Encendiendo Velleman VDPL501MHS10