Velleman PIR416 Manual de usuario descargar pdf (Pagina 5)

PIR416

V. 04 – 26/07/2013 5 ©Velleman nv

6. Connect the wiring [1] to the terminals according to the diagram

on page 2. Wire colours:

red (+)

bla ck (-)

brown

Warning: do not short-circuit any terminals.

7. Connect the power supply.

8. To test the PIR sensor, set the light sensitivity to OFF and the

movement sensitivity and 5” to ON. The load should switch on

immediately and – when no movement is detected – switch off

afte r 5 s.

Note: DO NOT change the DIP switch settings when power is

connected!

5. Tec hnical Specifications

switch type relay

detection angle 100°

detection range 8 m (@ 22 °C)

rated load

25 W resistive load

(max. inrush current 2.1A)

input 12 Vdc, 2.6 A

output max. 12 Vdc 2.5 A / 25 W

working temperature -10 °C to +40 °C

working humidity < 93 % RH

time-dela y switch

5 s, 30 s, 1 min, 3 min, 5 min, 8 min

light control

< 3 lx to 2000 lx

dim ensions visible part Ø 22 x 10 mm

hidden part (controller) 55 x 25 x 35 mm

we ight ± 41 g

Use this device with origina l accessories only. Velleman nv

cannot be held responsible in the event of damage or injury

result ing from (incorrect) use of this device. For more info

concerning this product and the latest version of this manual,

please visit our website www.velleman.eu. The information in

this manual is subject to change without prior notice.

1 2 3 4 5 6 7 8 9 10 ... 32 33

Sin comentarios

Velleman PIR416 Manual de usuario Pagina 5