Velleman VRC801D2 Manual de usuario descargar pdf (Pagina 12)

VRC801D2 VELLEMAN

F. Show View Function

This remote control

has a Show view function to scan all TV or CAB/SAT channels for your

quick view.

1. Press the device key to select the device which you wish to operate.

2. Press and hold the Show View key about 1 second. When the LED of the device button

flashes and it goes into Show View mode. The remote control automatically scans all

channels for a brief quick view.

Remark:

1. The remote control must be pointed at the device until Show View mode finished.

2. If you want to exit the show view mode, please press any key.

G. ALL OFF

You can turn off or turn on all devices by one button only.

Press and hold the ALL OFF key for about 1 second and then release it. The remote control

will send out all current power signal to turn on (or turn off) for every device one by one.

Meanwhile the device key flashes to tell you which power signal is been sending.

Remark:

The remote control must be pointed to device that you like to control until the operation finished.

H. Delete All

Delete all set-up data and reset the device to the factory setting.

1. Press the SET key for more than 3 seconds before releasing it.

2. Press the UP or DOWN key to select CONFIGURE in the LCD menu, and then press the

OK .

3. Press the UP or DOWN key to select Clear ALL in the LCD menu, and then press OK.

Sure Clear is displayed on the LCD screen.

Press OK to delete all the settings and to return to the factory settings.

For more info concerning this product, please visit our website www.velleman.eu.

The information in this manual is subject to change without prior notice.

1 2 ... 7 8 9 10 11 12

Sin comentarios

Velleman VRC801D2 Manual de usuario Pagina 12