Velleman SP200B Especificaciones descargar pdf (Pagina 8)

SP200B VELLEMAN

E. PANIC ALARMING

The transmitter can be used as a remote panic switch to manually trigger the

alarm in case of an emergency. To do so, hold down the button on transmitter

for over 3 seconds and the alarm will become tripped and the siren will begin to

sound.

If you want to stop panic alarming, again press the transmitter will disarm the

panic alarming.

F. TRIGGER THE ALARM :

After 5 seconds while the alarm armed, open the doors/hood/trunk, smashing

vehicle body or window, jacking or towing the vehicle. Then siren will turned

on to alert of an intrusion for 60 seconds. Then it will stop and automatic reset

and re-arm.

G. TRANSMITTER BATTERY REPLACEMENT :

If the ranges of your transmitter deteriorate, it is possible that you need to

replace the battery.

1. Release the screws of transmitter and remove upper transmitter case with a

screwdriver.

2. Remove old battery from transmitter.

3. Install a new battery (12 volt) noting the (+) and (-) marks in the battery area

of the transmitter.

4. Replace upper transmitter case with care, don't damage the inside

components.

5. Tighten the screw on the back of transmitter.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 21 22

Sin comentarios

Velleman SP200B Especificaciones Pagina 8