Velleman CAMCOLVC4 Ficha de datos descargar pdf (Pagina 4)

CAMCOLVC4

Components nv

4. Features

• use as webcam or PIR sensor picture camera

• record images in JPG format on SD card (256Mb SD card included)

• PIR motion detection

• in PIR detector housing

• easy installation, just plug & play and the camera starts recording

• comes with AC power adaptor, 256Mb SD card, software and

mounting bracket

• system requirements: Windows

XP, Vista

5. Overview

The CAMCOLVC4 can be used as a passive IR sensor that captures

images every 3 seconds when motion is within PIR range, or as

webcam.

Refer to the illustrations on page 2 of this manual.

1 DC input 5 pinhole camera

2 status LED 6 mini USB port

3 SD card slot 7 power ON/OFF switch

4 shutter button 8 PIR senso

6. Use as PIR sensor picture camera

• Insert the included 256MB SD card (or another one, ≤ 1GB) into the

SD card slot [3], connector pins facing towards back of the camera.

• Make sure the power ON/OFF switch [7] is in the OFF position and

plug the DC connector from the included adaptor into the DC input

[1] from the camera. Plug the adaptor in a mains outlet.

Note: only use the included power adaptor.

• Wait at least 30s for the camera to initialize before switching the

power ON/OFF switch [7] to the ON-position. The camera will take a

picture every 3 seconds when motion is detected within the

detection range (±5m). Note that there is no date or time stamp on

the images. Image size normally <100KB.

• Press on the shutter button [4] to take an instant photo.

• The camera can be mounted on the wall using the included

mounting bracket. Do not point towards bright objects.

• To review the images, see §9.

1 2 3 4 5 6 7 8 9 ... 36 37

Sin comentarios

Velleman CAMCOLVC4 Ficha de datos Pagina 4