
CAMSETW13 VELLEMAN
8. Troubleshooting
Problem Possible Solution
I forgot the password
• Uninstall the CameraViewer software and re-install it.
No image display
• Make sure both the camera and the receiver are set on the same channel.
• Signal is weak. Relocate the camera.
• Switch off the interference source.
Distorted picture colour
• Set the colour on your PC as 16 bits or higher.
No wireless communication
• Make sure both the camera and the receiver are set on the same channel.
Black and white or flickering image
• Make sure both the camera and the receiver are set on the same video
system.
Alarm does not work
• Engage the alarm function by clicking the IR detection button/sound
detection.
Unreadable character display
• Make sure the language of the CameraViewer is identical to the language
of your computer’s operating system.
Playing time of the video is much
shorter than recorded time
• Your computer cannot handle the frame rate. Select a lower recording
frame rate.
9. Technical Specifications
Camera
Sensor CMOS
Resolution 628 x 582
Viewing Angle 55°
Min. Illumination 5 lux (F1.2, IR off)
Transmission Frequency ISM 2,400MHz ~ 2,483MHz
Transmission Power 10mW
Modulation Type FM
Bandwidth 18MHz
Power Supply 8VDC/300mA (PSU incl.) or 3 x 1.5V batteries (order code
LR03C, not incl.)
Motion Detection Distance 8m
Motion Detection Area 120° (H), 15° ~ 25° (V)
Sound Sensitivity > 50dB
Power Consumption 180mA (IR off), 230mA (IR on)
Transmission Range max. 80m in open field
Night Vision Range 5m
Dimensions 85 x 109 x 111mm
Weight 170g
Selectable Channels 2,414MHz, 2,432MHz, 2,450MHz, 2,486MHz
Receiver
Intermediate Frequency 480MHz
Demodulation Type FM
Sensitivity < -85dBm
Transmission Interface USB 2.0
Dimensions 105 x 22 x 69mm
Weight 90g
Comentarios a estos manuales