Velleman DVM1500 Manual de usuario descargar pdf (Pagina 7)

DVM1500

V. 03  04/11/2013 7 ©Velleman nv

pollution which is to be found in a certain environment depends mainly on the

insulation and the enclosure properties. The pollution degree rating of the

DMM indicates in which environment the device may be used.

Pollution

degree 1

No pollution or only dry, nonconductive pollution occurs. The

pollution has no influence (only to be found in hermetically sealed

enclosures).

Pollution

degree 2

Only nonconductive pollution occurs. Occasionally, temporary

conductivity caused by condensation is to be expected (home and

office environments fall under this category).

Pollution

degree 3

Conductive pollution occurs, or dry nonconductive pollution occurs

that becomes conductive due to condensation that is to be

expected (industrial environments and environments exposed to

outside air - but not in contact with precipitation).

Pollution

degree 4

The pollution generates persistent conductivity caused by

conductive dust or by rain or snow (exposed outdoor

environments and environments where high humidity levels or

high concentrations of fine particles occur).

Warning: This device was designed in accordance with EN 61010-1 pollution

degree 2. This implies that certain restrictions in use apply that are related to

pollution which can occur within the environment of use. Refer to the table

above.

This device is only suitable for measurements in Pollution

degree class 2 environments.

6. Description

Refer to the illustrations on page 2 of this manual.

ON/OFF

Switch the meter on or off using this key.

FUNC.

Selection of the DC (default) or AC modes, and the (default) or

modes. This key function is only available in the A and ( )

ranges.

RANGE

Selection of the automatic (default) or manual modes, selection of

manual or auto-ranging modes, selection of ranges in manual

mode. This key function is 

HOLD

Fixes the current value on the display. Press again to return to

normal mode.

REL

Selection of the relative measurement mode. This key function is

CAP ranges.

Switch the backlight on or off using this key. This key function is

not available in the EF- range.

Rotary

switch

Use the rotary switch to select the function and the desired

ranges.

Terminals

VΩ °CHz: Terminal receiving the red test lead for voltage,

resistance, capacitance, diode test, temperature and frequency

measurements.

1 2 3 4 5 6 7 8 9 10 11 12 ... 103 104

Comentarios a estos manuales

Sin comentarios

Velleman DVM1500 Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Herramientas Velleman DVM1500