Velleman DVM8010 Manual de usuario Pagina 5

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 22
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 4
DVM8010 Rev. 01
21.01.2010 ©Velleman nv
5
4. Features
4 digits LCD
auto power-off
comes with: storage box, wristlet, batteries, user manual
optional telescopic tripod (not incl.): CAMB17
5. Use
Refer to the illustrations on pages 2 and 3 of this manual.
Remove the sensor cover [1] by releasing the screw at the back of the
device and sliding the cover upwards.
Press the ON/OFF button to switch the device on. Press and hold ±2s to
switch it off.
The device powers off automatically after ±20min. To disable auto-power
off, press and hold the Hold/Light button while switching the device on.
The display will show AP OFF. Press the Hold/Light button again to
confirm. To re-enable auto-power off simply switch the device off and on
again.
Press the Unit button multiple times to scroll through the different
measuring units [F, G]:
Press the Mode button to display only the highest measured values (see
indicator [E]). Press a second time to display the lowest measured
values. Press again to return to normal measuring mode.
Press the Hold/Light button shortly to go into hold-mode [A]. The
current measurement remains on the display. Press again shortly to exit
hold-mode and return to normal measuring mode.
Press and hold the Hold/Light button ±2s to switch on the backlight
[B]. Press and hold again ±2s to switch the backlight off.
When the battery indicator [H] is shown, replace the batteries (see §8).
Always place the sensor cover [1] back when the device is not in use.
6. Operation tips
Do not touch the sensor [2] and keep the sensor away from possible
interfering sources e.g. a fan, heating element, body … Also, do not
expose the sensor to direct (sun)light as this will lead to false readings.
Consider mounting the device on a tripod (not incl.) for longer and more
stable measurements.
Make sure the device is at ambient temperature for accurate
measurements.
Remove the batteries when the device is not used for a long time.
Vista de pagina 4
1 2 3 4 5 6 7 8 9 10 ... 21 22

Comentarios a estos manuales

Sin comentarios