Velleman SCAMSET Manual de usuario descargar pdf (Pagina 7)

SCAMSET

V. 02 – 30/10/2013 7 ©Velleman nv

3. Connect the wires to the monitor and electrical lock as shown on the wiring diagram.

4. Attach the bracket as shown, using the included wall anchors and screws.

7. Operation

• When a visitor presses the call button on the outdoor camera, the bell tone sounds and the display

switches on.

• Press to speak to the visitor.

• Press to open the door.

• When you have finished speaking to the visitor, press again.

The display switches off automatically.

8. Settings on the Monitor

8.1 Menu Settings

On the menu of the monitor, you can change the following settings:

• Brightness: sets the image brightness.

• Contrast: sets the image contrast.

• Saturation: sets the image saturation.

• Audio: sets the volume on the monitor.

To adjust the volume on the intercom, use the potentiometer on the back panel of the monitor.

Using the menu

• To switch on the monitor, press the doorbell on the outdoor camera.

• On the monitor, press to enter the menu.

• Press to select the setting you want to change.

• Press or to change the setting.

• The menu disappears automatically after a few seconds.

Reset

To reset all settings:

• On the monitor, press to enter the menu.

• Press to select Reset.

• Press or to reset the device.

Exit

The menu disappears automatically after a few seconds.

You can also exit the menu manually, as follows:

• Press to select Exit.

• Press or to exit the menu.

8.2 Button Settings

Bell tone

The monitor has several bell tones.

Press to browse through the tones and set another tone.

Mute

• Press to mute the bell.

• While mute is active, the LED on the device flashes.

• When someone calls at the door, the display switches on without a bell

tone.

• Press again to cancel mute.

1 2 3 4 5 6 7 8 9 10 11 12 ... 29 30

Comentarios a estos manuales

Sin comentarios

Velleman SCAMSET Manual de usuario Pagina 7

Comentarios a estos manuales