Velleman VMB1TC Manual de usuario Pagina 38

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 104
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 37
38 VMB1TC Temperature controller manual – rev 5.0
Searching for temperature sensors
Before the controller can work together with the temperature sensors VMB1TS it must first scan the network for all
connected temperature sensors.
When temperature sensors are installed or removed afterwards, the search process must be repeated to update the list of
sensors to the new situation.
1. Press and hold the ‘Menu’ button for ±4 seconds to
open the extended menu.
2. If necessary scroll through the extended menu using
the or button until the ‘Configuration’ item
appears.
3. Select the configuration menu with the button.
4. Scroll through the configuration menu using the or
button until the ‘Scan sensors’ item appears.
5. Select the scan sensors menu with the button.
The search for sensors on the network is now in
progress.
6. Once the search process is completed, the first of the
connected temperature sensors is shown on the
display.
Location
5
Menu
Mode
Configuration
Location
5
Menu
Mode
Configuration
Location
5
Menu
Mode
Language
Location
5
Menu
Mode
Scanning 00
Location
5
Menu
Mode
Scan sensors
Location
5
Menu
Mode
Temp sensor 01
Mo 0:09 20
Vista de pagina 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 103 104

Comentarios a estos manuales

Sin comentarios