Velleman VMB1TC Manual de usuario Pagina 49

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 104
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 48
VMB1TC Temperature controller manual – rev 5.0 49
Defining zones
It could be interesting to group different sensors in a zone. When that zone is selected, all operations on the controller will
be applicable for all sensors that belong to that zone. This way operating the system can be greatly facilitated.
It is possible to define up to 7 zones e.g. ground floor, second floor, bedrooms …
Default temperature sensors are not assigned to a zone. To assign them to a zone the procedure below should be
followed.
1. Press the ‘Location’ button repeatedly until the
sensor that will to be added to a zone is displayed.
2. Press and hold the ‘Menu’ button for ±4 seconds to
open the extended menu.
3. Scroll through the extended menu using the or
button until the ‘Sensor settings’ item appears.
4. Select the sensor settings menu with the button.
5. Scroll through the sensor settings menu using the
or button until the ‘Zone number’ item appears
6. Select the zone number menu with the button.
7. Change the zone with the or button.
Option ‘---‘ indicates that the sensor does not belong
to a zone.
8. Confirm with the button.
Location
5
Menu
Mode
Bedroom
Zone 1
Location
5
Menu
Mode
Bedroom 1
Mo 14:32 16
Location
5
Menu
Mode
Bedroom 1
Program
Location
5
Menu
Mode
Bedroom 1
Sensor settings
Location
5
Menu
Mode
Bedroom 1
Operating mode
Location
5
Menu
Mode
Bedroom 1
Zone number
Location
5
Menu
Mode
Bedroom 1
________
Location
5
Menu
Mode
Bedroom 1
Zone number
Vista de pagina 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 103 104

Comentarios a estos manuales

Sin comentarios