Velleman DVR16H1 User manual Manual de usuario descargar pdf (Pagina 28)

FREQUENTLY-USED FUNCTIONS

6) AREA

Click “EDIT” to set the motion detection area.

There are 16 × 12 grids per camera for all channels. Pink blocks represent the area

that is not being detected while the transparent blocks are the area under

detection.

5.5 PTZ Camera Setting

Right-click to display the main menu, and select “ADVANCED CONFIG” Æ “DEVICES”.

ADVANCED CONFIG

CAMERA CH1 CH

CH7 CH

CH1

CH11 W X

DETECTION DEVICE PTZ

ALER

ID 00

NETWORK PROTOCO

NORMA

DISPLA

RATE 2400

RECORD

DEVICES

EXI

1) DEVICE

For the PTZ camera, select “PTZ”.

2) ID

Click the current value to set the ID number (0 ~ 255) for the connected PTZ

camera if necessary.

Make sure the ID setting of the camera is the same as the setting here, or the DVR

will not be able to control the device.

Note: To know the default ID of the PTZ camera, please refer to its user manual.

3) PROTOCOL

Select NORMAL (our protocol), P-D (PELCO-D) or P-P (PELCO-P) protocol.

4) RATE

Select the baud rate for the connected PTZ camera (2400 / 4800 / 9600 / 19200 /

57600 / 115200).

Make sure the baud rate setting of the camera is the same as the setting here, or

the DVR will not be able to control the device.

Note: To know the default baud rate of the PTZ camera, please refer to its user

manual.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 70 71

Sin comentarios

Velleman DVR16H1 User manual Manual de usuario Pagina 28