Velleman CAMIP6 Manual de usuario descargar pdf (Pagina 7)

CAMIP6

15/09/2010 ©Velleman nv

7.2 Auto Search

• In order to use Auto Search, a camera must be connected to the same LAN (Local Area Network)

as the computer. Double-click on the Auto Search directory or right-click on Auto Search and

left-click again on Auto search to start searching the network.

Note: be aware that routers or firewalls might prevent the software from seeing the IP-camera. Get

advice from a network administrator when this is the case.

• The software interrogates the local LAN and shows all the found IP-camera IDs (e.g. 001015072)

under the Auto Search directory. Scroll the mouse over the camera ID to see the IP-address.

Note: a camera which is shown under the Auto Search directory is not available worldwide. It must

be moved to the Camera List (see § 7.4) to become accessible from another network.

7.3 Web configuration

• Right-click on the camera ID and left-click on Web configure to configure the camera using a

web browser.

Note: when configured in the appropriate way, the IP-camera can be reached from any

computer/web browser in the world. Simply type the IP-address into the address bar of the

web browser and enter the user name and password.

• The browser requires a username and password to set-up the camera. The default user name is

admin, no password required.

• When user name and password are validated, the information page is shown.

1 2 3 4 5 6 7 8 9 10 11 12 ... 114 115

Sin comentarios

Velleman CAMIP6 Manual de usuario Pagina 7