Velleman CAMIP7N Manual de usuario descargar pdf (Pagina 26)

CAMIP7N

V. 04  23/09/2013 26 ©Velleman nv

12. Additional information

12.1 Password

The default administrator login is admin without a password. To

enhance security, a new administrator password should be set as

soon as possible (see above).

If you have lost the administrator password, you can reset the

camera to factory defaults (admin, no password) by pressing and

holding the RESET button at the bottom of the camera for about 5

seconds.

When doings so, all other user settings will be lost as well.

12.2 WiFi

1. Refer to the user manual of your wireless router to obtain

network information e.g. SSID, Channel, Security,



2. Use previously obtained information to configure your camera

via a fixed network cable

(see Wireless LAN settings).

3. Reboot the camera.

4. Wait at least 30 seconds before unplugging the network cable.

Then unplug the power supply.

5. Re-insert the power plug.

After about 30 seconds, the camera should be up and running in

WiFi mode.

12.3 Connect the camera on an ADSL network

1. Connect the camera to a PC. The easiest way is to use a router.

If no router is available, you must use a cross cable (not incl.) to



set the IP addresses on PC and camera manually.

2. Configure the camera with the IP camera tool (see above).

3. Log on to the camera as administrator and configure ADSL

settings (user name + password).

4. Configure the DDNS Service Settings and click Submit. The

camera reboots.

5. Connect the camera directly to the ADSL modem. It is now

available through the internet by entering the domain name in

your internet browser.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 206 207

Sin comentarios

Velleman CAMIP7N Manual de usuario Pagina 26