Velleman SPBS8 Manual de usuario descargar pdf (Pagina 3)

SPBS8

01 (09/10/2008) Velleman

Box includes

• 1 LCD display with mounting stand and cable

• 1 front controller unit

• 1 rear controller unit

• 8 sensors

• 4 front sensor cables of 4,5m each, numbered 5~8

• 4 rear sensor cables of 2,5m each, numbered 1~4

• 1 on/off switch with cabling (2,4m)

• 1 power cable for rear ECU

• 1 cable to connect front and rear ECU

• 1 drill Ø18,5mm for sensor mounting

• 1 user manual

• Cable clips

• Double sided adhesive tape

5. System overview

A. Rear Electronic Control Unit

A1. DC +12V (from reverse light)

A2. GND

B. Front Electronic Control Unit

B1. ACC +12V

B2. GND

B3. DC +12V (from brake light)

C. Display unit

D1~D8. Sensor

E. Reverse light

F. On/Off switch

6. Installation

DO NOT apply power to the system before all connections are made.

Sensors

• Choose the location of the sensors on the bumper carefully, as the proper functioning of the

system depends on it.

Note:

beware that detection results might be affected when sensors are installed in steel bumpers.

• Refer to the picture below for the best horizontal and vertical position. L=width of the vehicle.

1 2 3 4 5 6 7 8 ... 35 36

Sin comentarios

Velleman SPBS8 Manual de usuario Pagina 3