Velleman DVM2000 Manual de usuario Pagina 9

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 80
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 8
DVM2000 VELLEMAN
9
o Select the or measurement mode by pressing SELECT.
o Connect the measuring probes to the resistor and read the measured resistance value.
o Read the measured value. Select a higher range by pressing RANGE when ol is displayed.
o Simply connect the measuring probes to the circuit for the continuity test.
o Remember to turn off the circuit before measuring resistance or continuity.
Capacitance Measurements
Capacitance ranges: 10pF~5000µF
o Switch on your multimeter and set to rotary selector switch to
.
o Insert the red and the black measuring probes in the V//Hz and the COM terminals respectively.
o Discharge the capacitor before measurements.
o Connect the red measuring probe to the positive pole and the black measuring probe to the negative pole of a
heteropolar capacitor.
o Read the measured value. Select a higher range by pressing RANGE when ol is displayed.
DC µA/AC µA/DC µA + AC µA Measurements
Current ranges: 0.01µA~5000µA
o Switch on your multimeter and set to rotary selector switch to
.
o Insert the red and the black measuring probes in the mA/µA and the COM terminals respectively.
o Select the DC µA, AC µA or DC µA + AC µA measurement mode by pressing SELECT.
o Turn off the power to the circuit to be measured. Connect the measuring probes in series to the circuit and turn on
the power to the circuit.
o Read the measured value. Select a higher range by pressing RANGE when ol is displayed.
Vista de pagina 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 79 80

Comentarios a estos manuales

Sin comentarios