Velleman CSR1 Manual de usuario descargar pdf (Pagina 5)

CSR1 5 VELLEMAN

c. Sensitivity

MOTION GAIN

DISCRIM MOTION GAIN

SENSITIVITY PIN -PT GAIN

AUDIO TUNE

PROGRAMS

SET UP BACK

This sets the sensitivity of the audio signal and the ID display in normal search or motion mode. The level is set by

rotating the MENU/SCROLL control, the current level is indicated on the display. Once the desired level has been set

by rotating the MENU/SCROLL control, press ENTER to store the setting.

NOTE: This setting has no effect on the RADAR display or audio level in Pin Point mode.

TIP! This level should be set as high as possible without the CSR1 spuriously sounding off.

PIN - PT GAIN

DISCRIM MOTION GAIN

SENSITIVITY PIN -PT GAIN

AUDIO TUNE

PROGRAMS

SET UP BACK

This sets the sensitivity of the Pin Point, or non-motion, mode. When Pin-Pt Gain is selected the CSR1 automatically

selects Pin Point mode. Once the desired level has been set by rotating the MENU/SCROLL control press then

ENTER button to store the setting. This setting also alters the sensitivity of the RADAR display.

NOTE: This setting has no effect on the normal or motion search mode.

TUNE

DISCRIM MOTION GAIN

SENSITIVITY PIN -PT GAIN

AUDIO TUNE

PROGRAMS

SET UP BACK

This sets the threshold or background tone. This is only audible with Silent Search turned off. As soon as Tune is

selected then Silent Search will be turned OFF so that the background tone will be heard. Once the desired level has

been set by rotating the MENU/SCROLL control press the ENTER button to store the setting.

d. Audio

DISCRIMINATION

DISCRIM DISCRIM PIN -PT OFF

SENSITIVITY SIL SEARCH PIN -PT ON

AUDIO MODE MOTION OFF

PROGRAMS MOTION ON

SET UP BACK

This enables or disables Audio Discrimination for both motion and Pin Point modes. Audio Discrimination gives the

operator an indication of the composition of the target by varying the pitch/tone of the audio signal. The higher the

pitch the further up the ID scale the target will be. For all modes, highlight the desired option by rotating the MENU/

SCROLL control and then press the ENTER button.

NOTE: Pin Point and motion Audio Discrimination can be set independently.

PIN - PT OFF: turns Audio Discrimination OFF for Pin Point Mode.

PIN - PT ON: turns Audio Discrim ON for Pin Point Mode: it gives a continuous pitch change for the entire ID range.

MOTION OFF: This turns Audio Discrimination OFF for motion Mode.

MOTION ON: This turns Audio Discrimination ON for motion Mode. In this mode bad signals such as Iron will give a

low tone. Good signals will give a high tone.

NOTE: No tone will be heard if the object has been rejected by the ID.

TIP! Best results will be obtained in this mode if Silent Search is on.

1 2 3 4 5 6 7 8 9 10 ... 55 56

Comentarios a estos manuales

Sin comentarios

Velleman CSR1 Manual de usuario Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Deportes y recreación Velleman CSR1