
DVR4MQAEE_v5 VELLEMAN
- 20 -
1. NETWORK TYPE (STATIC):
Select NETWORK TYPE and press “+” or “-” button to set the network type as STATIC. Press “ENTER” to go
to the submenu of the network. In the submenu of network type, use “+” or “-” button to set all the information
needed in the DVR. See below.
2. NETWORK TYPE (DHCP):
This DHCP function needs to be supported by router or modem network cable with DHCP service. For detailed
DHCP setting, refer to “10.f. Licensed Software AP”.
3. NETWORK TYPE (PPPoE):
This PPPoE function needs to have “username” and “password” from ISP supplier.
For detailed PPPoE setting, refer to “10.f. Licensed Software AP”.
NOTE: DHCP and PPPoE network types need to apply DDNS service to get “Hostname” to correspond to dynamic
IP address. For detailed DDNS setting, refer to “10.f. Licensed Software AP – DDNS”.
l. Advance Menu: HDD INFO
You can get all the capacity information of the connected HDD.
m. Advance Menu: EVENT LOG
You can get all the information (event type, time and channel) of the event list (including video loss list, net list, other
lists such as power on / off, key unlock, reset to default). Select the event list you want to see and press “ENTER”.
1. VLOSS LIST:
Show the information of video loss list.
2. NET LIST:
Show the information of net login list.
3. OTHERS:
Show the information of power on / off, unlock, reset to default list.
STATIC
IP 192.168.001.010
GATEWAY 192.168.001.0 → 255
NETMASK 252.252.252.000
HDD INFO
HDD NUM HDD SIZE
MASTER 400.517
EXT001 400.517
EXT002 400.517
EXT003 NO HDD
EXT004 NO HDD
EXT005 NO HDD
EXT006 NO HDD
EVENT LOG
VLOSS LIST
NET LIST
OTHERS
CLEAR
LL
Comentarios a estos manuales