Velleman IVSPROM1 Manual de usuario descargar pdf (Pagina 11)

IVSPROM1

09.11.2010 ©Velleman nv

• AUDIO (SLOW + ZOOM)

Press “SLOW” + “ZOOM” to select live or playback audio from audio channel 1~4.

Live audio from audio channel 1~4

(indicated in white).

Playback audio from audio channel 1~4

(indicated in yellow).

Audio channel unselected

• P.T.Z. ( + SEQ)

Press “ ” + “SEQ” at the same time to enter or exit the PTZ control mode.

• USB port

There are two USB ports on the front panel, one for connecting a USB mouse for mouse control, and the

other one for connecting an USB flash drive for video backup.

Note: Do not connect two USB mice or two USB flash drives simultaneously.

Note: For compatible USB flash drive list, please refer to “APPENDIX 3” in the full user manual.

7.2 Rear Panel

• VIDEO IN (1 ~ 4): Connect to the video connector of a camera.

Note: The DVR will automatically detect the video system of the camera; make sure that the cameras are

properly connected to the DVR and powered before the DVR is turned on.

• AUDIO IN (1~4)

Connect to the audio connector of a camera if the camera supports audio recording.

Note: To make a video backup with audio, make sure the camera which supports the audio function is

connected to the video-in channel and audio-in channel. For example, the audio data from audio CH1 will

be recorded with the video data from video CH1.

• AUDIO OUT

Mono audio output to connect to a speaker.

• MONITOR

Connect to a CRT monitor for video output.

Note: When both MONITOR and VGA are connected, press the left key ◄ on the DVR front panel during

DVR power-on to force the video output via MONITOR. For details, refer to §5.5.

• CALL

Connect to a monitor specific for sequence display.

• VGA

Connect to a LCD monitor directly.

Note: When both MONITOR and VGA are connected, press the right key ► on the DVR front panel during

DVR power-on to force the video output via VGA. For details, refer to §5.5.

• IR

Connect an IR receiver extension line (not incl.) for remote control.

• EXTERNAL I/O

This port is used to connect external devices (such as speed dome cameras or external alarm, etc).

• LAN

Connect to Internet by LAN cable.

• DC 19V

Connect to the supplied adapter.

• Power Switch

Switch to “|” to turn on the power, to “|” to turn off the power.

8. Basic operation

Note: some of the features and functions described below only apply to the human detection camera.

8.1 Live page

Refer to the image below.

1 system time 4 recording icon

2 status bar 5 channel

3 available disk capacity 6 motion icon

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 94 95

Comentarios a estos manuales

Sin comentarios

Velleman IVSPROM1 Manual de usuario Pagina 11

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas De Videovigilancia Velleman IVSPROM1