Velleman IVSPROM1 Manual de usuario descargar pdf (Pagina 7)

IVSPROM1

09.11.2010 ©Velleman nv

5.3 DVR power on

• This device should be operated only with the type of power source indicated on the manufacturer’s label.

Connect the indicated AC power cord to the power adapter, and plug into an electrical outlet.

Note: Before the DVR is powered on, make sure that (1) the cameras are connected and power-supplied

for the detection of the camera video system to be correct, and (2) a monitor (either LCD or CRT monitor,

not incl.) is connected to the DVR for correct video output detection.

• Switch on the DVR with the power switch on the back of the device. It will take about 30s for the DVR to

initialize.

Note: To ensure that your DVR works constantly and properly, it's recommended to use an UPS,

Uninterruptible Power Supply (not incl.), for continuous operation.

5.4 Date and time setting

Before operating your DVR, please set the date and time on your DVR FIRST.

Note: DO NOT change the date or time of your DVR after the recording function is activated. Otherwise,

the recorded data will be disordered and you will not be able to find the recorded file from backup by time

search. If users change the date or time accidentally when the recording function is activated, it’s

recommended to clear all HDD data, and start recording again.

Note: when using the DVR for the first time, leave it powered on for at least 48 hours continuously after

the date & time is set correctly. To replace the internal battery, refer to APPENDIX 6 in the full user

manual.

• Right-click to enter the DVR password with the password keypad. The default administrator password is

0000.

• The status will be changed from (key lock) to (administrator).

• Right-click to show the main menu, and select “QUICK START” Æ “TIME SETUP” to set the date & time.

QUICK START

GENERAL DATE 2009 / NOV / 17

TIME SETUP TIME 15 : 35 : 53

EXIT

5.5 Clear hard disk

• It’s recommended to clear all data in the hard disk when using this DVR for the first time to ensure the

recorded data are not mixed with other data previously saved in the same hard disk.

• Right-click to show the main menu, and select “SYSTEM” Æ “SYSTEM INFO” Æ “CLEAR HDD”.

• The DVR will reboot when HDD data are cleared. For details, refer to §5.3.2 in the full user manual.

SYSTEM

TOOLS BAUD RATE 2400

SYSTEM INFO HOST ID 000

USB BACKUP R.E.T.R 5

DVD BACKUP AUTO KEY LOCK NEVER

CLEAR HDD HDD-0

RESET DEFAULT SUBMIT

REMOTE CONTROL ID 000

SERIAL TYPE RS485

VIDEO FORMAT NTSC

VERSION 1019-1008-1010-1010

EXIT

1 2 3 4 5 6 7 8 9 10 11 12 ... 94 95

Comentarios a estos manuales

Sin comentarios

Velleman IVSPROM1 Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas De Videovigilancia Velleman IVSPROM1