Velleman VMB1TS Manual de usuario descargar pdf (Pagina 30)

30 VMB1TS manual – edition 2

Remotely control anti-freeze mode

With the lower right button of the control panel the temperature sensor is set to anti-freeze mode.

1. Remember the address of the sensor module to

reinstate it later.

2. Set the address of the sensor module to ‘C1’.

The day, night and comfort LEDs are flashing to

indicate learning mode for pushbuttons that place

the module in anti-freeze mode.

Remark:

When multiple sensor modules needs to react to

the same pushbutton, remember their addresses

and set them also to ‘C1’.

3. Press and hold the ‘anti-freeze’ pushbutton

(at least 1 second) until its indication LED starts

flashing.

Remark:

As long as the pushbutton is pressed, the LEDs on

the sensor module will be off. This to confirm that

the pushbutton is assigned.

4. Repeat step 3 in case other pushbuttons must set

the sensor module in anti-freeze mode.

5. Reinstate the address of the sensor module(s) to

its (their) original value.

ADDR = C1



Comfort Day

Night Anti-freeze

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 42 43

Sin comentarios

Velleman VMB1TS Manual de usuario Pagina 30