Velleman CAMIP10 Manual de usuario descargar pdf (Pagina 4)

CAMIP10

16.12.2011 ©Velleman nv

6. Hardware installation and operation

• Choose a location for the camera, keeping following guidelines in mind:

• Do not install the camera in locations where extremely high or low temperatures or excessive

vibrations may occur.

• Avoid mounting the camera near high electro-magnetic fields.

• Do not aim the camera at the sun or other extremely bright objects.

• Attach the mounting bracket [8] to the wall or ceiling using the 3 included screws. Place the

CAMIP10 on top and secure it with the centre screw [15]. Determine the desired angle and

tighten the joint screws.

• Connect the antenna [1] to the antenna connector [11] and/or connect a network cable (included)

to the RJ45 jack [9].

Note: it is possible to connect the camera straight to the RJ45 port of a computer. In this case a

crossed cable (not incl.) should be used and network settings must be configured manually.

• Plug the DC connector of the power adaptor into the 5VDC input jack [10]. Only use the included

adaptor or one with the same specifications.

• Plug the adaptor into a suitable mains outlet (100~240V AC/50~60Hz).

Notes:

• It takes about 30s for the camera to initialise.

• When the image appears out of focus, turn the lens [5] to adjust.

7. Software installation

• Insert the included CD-ROM into a suitable computer system (not incl.).

System requirements: CPU ≥ 2.0 GHz / memory ≥ 256MB / network ≥ 10 MB / video card ≥

64MB memory / recommended OS: Windows 2000, XP, Vista, 7 or Mac.

Windows

• Locate the software installer IPCamSetup.exe and double click it.

• Follow the instructions on the screen. Click Next to start the software installation.

1 2 3 4 5 6 7 8 9 ... 101 102

Sin comentarios

Velleman CAMIP10 Manual de usuario Pagina 4