Velleman K8200 Manual de usuario descargar pdf (Pagina 36)

The fan should begin to blow air in the direction of the extruder.

If the fan does not turn, make sure the slider is at 100% and check your wiring. If the fan blows in the wrong

direction, mount it the other way around.

Now you can move the slider around, the fan should blow more or less according the position of the slider.

Turn off the fan by clicking on the “Fan” button again.

Now we need to test all the micro switches. These are critical for the machine to find its home position. Each axis has

its own micro switch and its corresponding adjust bolt. Before continuing you must be sure the printer moved in

the right directions when you previously tested all the motors.

First press the button “Turn Motor Off”. This turns off the hold capability of the motors so you can move the HEATED

BED PCB around by hand.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 44 45

Sin comentarios

Velleman K8200 Manual de usuario Pagina 36