CAMSCC3G
24/03/2009 ©2008 Velleman
®
Components nv
5
5. Preliminary settings
Turning on the device
• The camera can be switched on/off using the Power Supply Switch [G].
• To turn on or switch off the device move the switch [G] from the “OFF” to the “ON”
position or vice versa using a small flat screwdriver.
6.
Installation
• A USIM card (not included) must be inserted into the device before it can be used,
disabling its PIN code using a video phone.
• Check to ensure that the device is switched off and the AC adaptor is unplugged before
inserting or removing the USIM card.
• The device will not function properly unless a USIM is inserted. In this case, the device
will note an anomaly and a red light will appear on the LED Network [J] and BATTERY
[H] LEDs.
• Insert the USIM card as shown in the illustration on page 3 of this manual into the slot
[L]. Remember to lock the USIM card after it is inserted by sliding the lock to the left.
Note 1: Check to ensure that the USIM card has been inserted as illustrated in the figure.
Note 2: Take care when inserting the USIM card, since the metal contacts on the USIM
card can be easily damaged/scratched.
Suggestions for installing the device
• Do not position the device in front of light sources (to avoid overexposure).
• Do not place any objects within a 1 meter radius of the internal visual angle of the device
(images could be unintelligible).
• Do not position the device in a basement; it may not have network coverage.
• Do not cover the device’s video camera with an object during a video call (image quality
may be compromised).
• Do not cover the device with objects containing metallic materials (signal quality may be
compromised)
Fastening the cable glands
Refer to the illustration on page 3 of this manual.
Fastening the bracket
Refer to the illustration on page 3 of this manual.
Fastening the camera to the bracket
Refer to the illustration on page 3 of this manual. Make sure to insert the washers [N] in
the indicated places.
Terminal box wires and cabling
Refer to the illustration on page 3 and the overview in §4 of this manual.
7.
Administrator management
Administrator management and alarm calls
• The administrator – the person authorised to send configuration commands – is defined
when the first video call to the device is made.
• When asked for a PIN number, enter the code found inside the bag stored in the device’s
box.
• The CAMSCC3 will call the administrator number during an alarm.
(26 paginas)
(12 paginas)
(15 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales