Velleman LX102 Manual de usuario Pagina 6

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 27
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 5
LX102
V. 01 – 06/06/2012 6 ©Velleman nv
Use the <UP> and <DOWN> buttons to navigate the menu map and menu options. Press <ENTER> to
access the menu function currently displayed or to enable a menu option. To return to the previous
option or menu without changing the value, press the <MENU> button.
7.2 Menu Functions
menu sub-menu function description
built-in programs select between switching and fading built-in programs
speed
set speed of built-in programs (
~ )
address
set DMX address ( ~ )
channel mode
select 2-channel DMX mode
select 3-channel DMX mode
select 7-channel DMX mode
dimming speed
no dimming speed
fast dimming speed
middle dimming speed
slow dimming speed
colour mixing select between 9 static colours
warm white dimmer ( ~ )
cold white dimmer ( ~ )
strobe speed
add strobe effect (
~ )
7.3 Stand-Alone Mode
Auto Mode
1. Press <MENU> until is displayed.
2. Press <ENTER> to confirm your selection.
3. Use <UP> or <DOWN> to select the desired program ( ~ ).
4. Press <ENTER> to confirm your selection.
5. Set the speed of built-in programs via <UP> or <DOWN> ( ~ )
6. Press <MODE> to confirm your selection.
Preset Colours
This device has pre-programmed static colours.
1. Press <MENU> until is displayed.
2. Press <ENTER> to confirm your selection.
3. Use <UP> or <DOWN> to select the desired program ( ~ ).
4. Press <ENTER> to confirm your selection.
Custom Static Colours
This device allows you to create custom static colours.
1. Press <MENU> until is displayed.
2. Press <ENTER> to confirm your selection.
3. Use <UP> or <DOWN> to scroll through the options:
o … = warm white intensity ( ~ , from 0 to 100%)
o … = cold white ( …) intensity ( ~ , from 0 to 100%)
o … = strobe speed ( (off) ~ (max.))
4. Press <ENTER> to select the desired sub-menu and use <UP> or <DOWN> to change the value.
5. Press <ENTER> to confirm the setting.
6. Press <ENTER> again to exit the menu.
Vista de pagina 5
1 2 3 4 5 6 7 8 9 10 11 ... 26 27

Comentarios a estos manuales

Sin comentarios